1 Hold down the down switch until the window is fully lowered. 2 Release the switch momentarily, and then press down again for 5 seconds. 3 Hold down the up switch until the window is fully raised. 4 Release the switch momentarily, and then press up again for 5 seconds. Back to topic and please post any fix. I have just bought my first Fiesta, a 2010 Zetec, 50,000 miles in lovely condition but is it normal for the dashboard lights and info screen to stay on for 15 mins after I've turned everything off and removed the key? They go out straight away if I lock it. Regards. Tony. 34. Ford Model: Fiesta 59 Plate Titanium 1.6 Petrol. Posted January 6, 2010. 57focus said: Hi everyone and a happy new year to you all. I was driving my wifes new fiesta the other night, admiring the lovely instrument panel and I suddenly realised there is no water temperature gauge. I have a focus myself and it does have one. With the ignition key on, there should be power at both wires. If you have power to one and not the other, you have an open in the wire from the fuse to the relay. You can jump across the fan relay to confirm the relay's failure. If the fan doesn't come on, we need to continue with the relay and it's wiring. Dshboard failure Solved. It is almost 2 years since the dashboard started turning off for around 5 seconds and then activates again. It does also lose energy when it is stopped, and I notice this thanks to the clock, which suddenly indicates 0:00:00 and this means there was an energy loss. I was thinking, there should be a recall on this part. Windscreen fogging up with no easy way to defrost because the blend mechanism doesn't work is a safety issue. In my opinion, this problem is too common for Ford to ignore. I have replaced mine every single year so far since new (the first two times under warranty). Marie B December 28, 2020. Resetting the start stop option in the Ford Fiesta is easy to do. It will only take about 4 to 7 minutes of Your time. The first thing You will need to do is open the driver's side door, and get inside. Put Your key in the ignition, and turn it to the on position. Make sure that You do not accidentally start the engine. hi, hoping some one can shed some light on this. my son has just wired a new stereo into his car but has discovered that the indicator lights are not working on the dash board anymore. the lights are still working outside the car but just get no green arrows flashing inside. not sure if this coul xsb2MH7.